Ivr; Configure Ivr; Table 39: Ivr Configuration Parameters - Grandstream Networks UCM6510 IP PBX User Manual

Ip pbx
Hide thumbs Also See for UCM6510 IP PBX:
Table of Contents

Advertisement

CONFIGURE IVR

IVR configurations can be accessed under the UCM6510 web GUI->PBX->Call Features->IVR. Users
could create, edit, view and delete an IVR.
Click on "Create New IVR" to add a new IVR.
Click on
to edit the IVR configuration.
Click on
to delete the IVR.
Name
Extension
Dial Other Extensions
Dial Trunk
Permission
Welcome Prompt
Digit Timeout
Response Timeout
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

IVR

Table 39: IVR Configuration Parameters

Configure the name of the IVR. Letters, digits, _ and - are allowed.
Enter the extension number for users to access the IVR.
If enabled, all callers to the IVR can dial other extensions. The default
setting is "No".
If enabled, all callers to the IVR is allowed to use trunk. The permission
must be configured for the users to use the trunk first. The default setting
is "No".
Assign permission level for outbound calls if "Dial Trunk" is enabled. The
available permissions are "Internal", "Local", "National" and "International"
from the lowest level to the highest level. The default setting is "Internal".
If the user tries to dial outbound calls after dialing into the IVR, the
UCM6510 will compared the IVR's permission level with the outbound
route's privilege level. If the IVR's permission level is higher than (or
equal to) the outbound route's privilege level, the call will be allowed to go
through.
Select an audio file to play as the welcome prompt for the IVR. Click on
"Prompt" to add additional audio file under web GUI->Internal Options-
>IVR Prompt.
Configure the timeout between digit entries. After the user enters a digit,
the user needs to enter the next digit within the timeout. If no digit is
detected within the timeout, the UCM6510 will consider the entries
complete. The default timeout is 3 seconds.
After playing the prompts in the IVR, the UCM6510 will wait for the DTMF
UCM6510 IP PBX User Manual
Page 129 of 229

Advertisement

Table of Contents
loading

Table of Contents