Join A Conference Call; Invite Other Parties To Join Conference; Figure 50: Conference Invitation From Web Gui - Grandstream Networks UCM6510 IP PBX User Manual

Skip Authentication When
Inviting User via Trunk from
web GUI

JOIN A CONFERENCE CALL

Users could dial the conference bridge extension to join the conference. If password is required, enter the
password to join the conference as a normal user, or enter the admin password to join the conference as
administrator.

INVITE OTHER PARTIES TO JOIN CONFERENCE

When using the UCM6510 conference bridge, there are two ways to invite other parties to join the
conference.

Invite from web GUI.
For each conference bridge in UCM6510 web GUI->PBX->Call Features->Conference, there is an icon
for option "Invite a participant". Click on it and enter the number of the party you would like to invite.
Then click on "Add". A call will be sent to this number to join it into the conference.

Invite by dialing 0 or 1 during conference call.
A conference participant can invite other parties to the conference by dialing from the phone during the
conference call. Please make sure option "Enable User Invite" is turned on for the conference bridge first.
Enter 0 or 1 during the conference call. Follow the voice prompt to input the number of the party you
would like to invite. A call will be sent to this number to join it into the conference.
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
If enabled, the invitation from web GUI for a conference bridge with
password will skip the authentication for the invited users. The default
setting is "No".

Figure 50: Conference Invitation From web GUI

UCM6510 IP PBX User Manual Page 125 of 229