Hmi-Cfw08-Rp Installation; Mip-Cfw08-Rp - WEG CFW08 Vector inverter User Manual

CFW-08 OPTIONS AND ACCESSORIES
8.3.1 HMI-CFW08-RP
Installation

8.4 MIP-CFW08-RP

118
Figure 8.4 - Dimensions of the HMI-CFW08-RP
The HMI-CFW08-RP can be installed directly on the panel door (0,12in),
as shown in the figures below:
52mm
(2.05in)
Figure 8.5 - Installation of the HMI-CFW08-RP
Isolation interface: Isolation interface installed in the inverter instead of
the standard keypad only when the remote parallel keypad (HMI-CFW08-
RP) is used.
The procedures for insertion and removing of the MIP-CFW08-RP are
similar to those shown in figure 8.13 for the KCS-CFW08 module.
36.3
15.9
58