Hmi Installation At The Cabinet Door Or Command Panel (Remote Hmi); Electrical Installation - WEG CFW-11 User Manual

3.1.5 HMI Installation at the Cabinet Door or Command Panel (Remote HMI)

65,0 [2,56]
Figure 3.8 - Data for the HMI installation at the cabinet door or command panel - mm [in]
The keypad frame accessory can also be used to fix the HMI, as mentioned in

3.2 ELECTRICAL INSTALLATION

DANGER!
The following information is merely a guide for proper installation. Comply with applicable local
regulations for electrical installations.
DANGER!
Les informations suivantes constituent uniquement un guide pour une installation correcte. Respectez
les réglementations locales en vigueur pour les installations électriques.
DANGER!
Make sure the AC power supply is disconnected before starting the installation.
DANGER!
Vérifiez que l'alimentation secteur CA est débranchée avant de commencer l'installation.
ATTENTION!
The short-circuit protection of the inverter does not provide short-circuit protection for the feeder
circuit. The short-circuit protection of the feeder circuit must be provided in accordance with applicable
local regulations.
28,5 [1,12]
23,5
35,0 [1,38]
[0,93]
Installation and Connection
∅4,0 [0,16] (3X)
Table 7.1 on page 7-4.
CFW-11 | 3-9
3