Hmi Installation At The Cabinet Door Or Command Panel (Remote Hmi) - WEG CFW-11 User Manual

WEG Part
Name
Number
11010802 KN1C-01
11010264 KIP21D-01
11010265 PCSA-01
11010266 PCSB-01
11010267 PCSC-01
11119781 PCSD-01
10960847 CCS-01
10960846 CONRA-01
Notes:
(1) Refer to the PLC Module Manual.
(2) Refer to the Anybus-CC Communication Manual.
(3) Refer to the Software Manual.
(4) Use DB-9 pin, male-to-female, straight-through cable (serial mouse extension type) for connecting the keypad to
the inverter or Null-Modem standard cable. Maximum cable length: 10 m (33 ft).
Examples:
- Mouse extension cable - 1.80 m (6 ft); Manufacturer: Clone.
- Belkin pro series DB9 serial extension cable 5 m (17 ft); Manufacturer: Belkin.
- Cables Unlimited PCM195006 cable, 6 ft DB9 m/f; Manufacturer: Cables Unlimited.
(5) Refer to the section 8.4 - Conduit Kit, for more details.

3.2 HMI Installation at the Cabinet Door or Command Panel (Remote HMI)

65.0 [2.56]
Figure 3.1: Data for the HMI installation at the cabinet door or command panel – mm [in]
Accessory models (Cont.)
Description
Conduit kit for frame C (standard for option N1).
IP21 kit for frame D (standard for option 21).
Kit for power cables shielding - frame A (standard for
option FA).
Kit for power cables shielding - frame B (standard for
option FA).
Kit for power cables shielding - frame C (standard for
option FA).
Kit for power cables shielding - frame D (included in the
standard product).
Kit for control cables shielding (included in the standard
product).
Control rack (containing the CC11 control board).
28.5 [1.12]
23.5 [0.93]
- English -
Addendum to the CFW-11 User's Manual
(5)
35.0 [1.38]
Identification
Parameters
Slot
P0027 P0028
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
∅4.0 [0.16] (3X)
CFW-11 | 9