WEG CFW08 Vector inverter User Manual page 166

WARRANTY TERMS FOR
FREQUENCY INVERTERS
CFW-08
WEG warrants its Frequency Inverters against defects in workmanship
and materials under the following conditions:
1.0 For the effectiveness of this warranty it is essential that the purchaser
inspects carefully the purchased inverter, immediately after receipt,
checking its characteristics and following its installation, adjustments,
operation and maintenance instructions. The inverter will be considered
as accept and approved automatically by the purchaser, when the
purchaser does not give written notice within max. five days after the
receipt of the product about verified non-conformities.
2.0 The warranty period is for twelve months from the invoice date of the
equipment issued by WEG or its authorized distributor, proved through
equipment invoice, but limited to twenty four months from the
manufacturing date, that is indicated on the product nameplate.
3.0 In case the inverter fails to function or operate incorrectly during the
warranty time, the warranty services will be carried out, at WEG
discretion, at its Authorized Repair Shops.
4.0 The failed product must be available to the supplier for a required
period to detect the cause of the failure and to make the corresponding
repairs.
5.0 WEG Automação, or its Authorized Repair Shops will analyze the
returned inverter and when the existence of the failure covered by
the warranty is proved, it will repair, modify or replace, at its discretion,
the defective inverter without cost to the purchaser, except as
indicated in Item 7.0.
6.0 The present warranty responsibility is limited only to repairs, changes
or replacement of the supplied inverter. WEG will have no obligation
or liability whatsoever to people, third parties, other equipment or
installations, including without limitation, any claims for loss of profits,
consequential damages or labor costs.
7.0 Other expenses as freights, packing, disassembling/assembling and
parameter setting costs will be paid exclusively by the purchaser,
including all fees, ticket, accommodation and meals expenses for
technical personnel, when needed and/or requested by the customer.
8.0 The present warranty does not cover the normal wear of the product
or equipment, neither damages resulting from incorrect or negligent
operation, incorrect parameter setting, improper maintenance or
storage, operation out the technical specification, bad installation
quality, or operated in ambient with corrosives gases or with harmful
electrochemical, electrical, mechanical or atmospheric influences.
CHAPTER 10
WARRANTY
165