Access And Read Only Parameters - P000; Access/Read Only Parameters - WEG CFW08 Vector inverter User Manual

DETAILED PARAMETER DESCRIPTION
6.3.1 Access and Read Only Parameters - P000 ... P099
Parameter
P000
Access Parameter
P002
Frequency
Proportional Value
P003
Output Current
(Motor)
P004
DC Link Voltage
P005
Output Frequency
(Motor) 0.01Hz (<100.0Hz);
P007
Output Voltage
(Motor)
P008
Heatsink Temperature
P009
Motor Torque
This
parameter is only
shown in vector
control
(P202=2)
P014
Last Fault
72
Range
[Factory Setting]
Unit Description / Notes
Releases the access to change the parameter values.
0...999
[ 0 ] The password is 5.
The use of the password is always active.
1
Indicates the value of P208 x P005.
0...6553
When the vector control mode is used (P202=2), P002 indicates
[ - ]
the actual motor speed in rpm.
0.01 (<100.0);
In case of different scales and units, use P208.
0.1 (<1000);
1 (>999.9)
Indicates the inverter output current in Amps. (A).
0...1.5 x I
nom
[ - ]
0.01A (<10.0A);
0.1A (>9.99A)
Indicates the inverter DC Link voltage in Volts (V).
0...862V
[ - ]
1V
Indicates the inverter output frequency in Hertz (Hz).
0...300Hz
[ - ]
0.1Hz (>99.99Hz)
Indicates the inverter output voltage in Volts (V).
0...600V
[ - ]
1V
Indicates the current power at the heatsink in Celsius degrees
o
25...110 C
(°C).
[ - ]
The inverter overtemperature protection (E04) acts when
1 o C
heatsink temperature reaches:
Indicates the torque developed by motor in, in percent (%) relating
0.0...150.0%
to the set rated motor torque.
[ - ]
The rated motor torque is defined by the parameters P402
0.1%
(motor speed) and P404 (motor power). I.e.:
where T
HP - (P404), and n
Indicates the code of the last occured fault.
00...41
Section 7.1 shows a list of possible faults, their code numbers
[ - ]
and possible causes.
-
Inverter
1.6-2.6-4.0-7.0A/200-240V
1.0-1.6-2.6-4.0A/380-480V
7.3-10-16A/200-240V
2.7-4.3-6.5-10A/380-480V
13-16A/380-480V
T = 716 .
nom
is given in kgf.m, P
nom nom
is the rated motor speed in rpm - P402.
nom
P008 [°C] @ E04
103
90
90
103
103
P
nom
n
nom
is the rated motor power in watts-