Cab-Rp-10; Hmi-Cfw08-Rs - WEG CFW08 Vector inverter User Manual

8.5 CAB-RP-1
CAB-RP-2
CAB-RP-3
CAB-RP-5
CAB-RP-7.5

CAB-RP-10

8.6 HMI-CFW08-RS

CFW-08 OPTIONS AND ACCESSORIES
LATERAL VIEW
37
21
Figure 8.6 - Dimensions of the MIP-CFW08-RP
Cables used to connect the inverter to the external parallel interface keypad
(HMI-CFW08-RP).
There are 6 cables options ranging in lenghts from 1m (39in) to 10m
(394in). The user must select among these lenghts according to his
requirement.
The cable CAB-RP must be laid separately from the power wiring by
meeting the requirements for the control wiring (refer to item 3.2.4).
External serial keypad: this interface is mounted external to the inver-
ter and must be used when the copy function is needed:
For more details about copy function refer to the description of the
parameter P215 in section 6.
It operates with the MIS-CFW08-RS and the cable CAB-RS-X, which
length must be chosen according to the needs (up to 10m).
Figure 8.8 - Dimensions of the HMI-CFW08-RS
FRONT VIEW
43
Figure 8.7 - CAB-RP-X
58
15.9
119