WEG CFW08 Vector inverter User Manual page 58

ACTION
Press the key to save the
selected option and to exit the
programming mode
Press the key to go to the next
parameter
Press the key and use the keys
and to set the correct
rated motor voltage
Press the key to save the
selected option and exit the
programming mode
Press the key to go to the next
parameter
Press the key and use the keys
and o set the correct rated
motor current (in this case 2.90A)
Press the key to save the
selected option and to exit the
programming mode
Press the to go to the next
parameter
Press the key and use the keys
and the to set the correct
motor speed (in this case 1720rpm)
Press the key to save the
selected option and exit the
programming mode
Press the key to go to the next
parameter
Press the and use the keys
and to set the correct
value for the motor frequency.
Press the key to save the
selected option and exit the
programming mode
HMI DISPLAY
Exit the programming mode
Set rated motor voltage:
Exit the programming mode
Rated motor current range:
Set rated motor current: 2.90A
Exit the programming mode
Rated motor RPM range:
Programmed rated motor RPM:
Exit the programming mode
Rated motor frequency:
Set rated motor frequency:
60Hz (the default value is maintained)
Exit the programming mode
START-UP
DESCRIPTION
Rated motor voltage range:
0 ... 600V
220V (the default value is maintained)
0.3 x I ... 1.3 x I
nom nom
0 ... 9999 rpm
1720rpm
0...F
máx
(2)
(2)
57