Sending And Receiving Short Text Messages - iPECS LDP-9008D User Manual

LDP-9008D & LDP-9030D

6.3 Sending and Receiving Short Text Messages

You can exchange short text messages (up to 80 alphanumeric
characters) with other display phone users. These messages
will activate the message on the LCD. If the ring/message LED
is set to Message Wait indication, the ring/message LED of
Call Back button will flash.
To send an SMS message to another Phone:
•
•
•
•
•
•
To view your received Short text messages:
•
•
•
To delete received Short text messages:
•
•
Press the
TRANS
Dial 36 (SMS send code),
Dial 1 to resend an existing message, or 2 to send a new
or edit an existing message,
Enter the station range to receive the message, to send to
a single station enter the station number twice,
Dial your message using 2 key strokes for each character
(refer to Character Entry Chart in
Press
/
HOLD SAVE
Press the
C
ALL
key, the LCD will display the Message Summary display,
ST CL VS VM US MS
000 000 000 000 000 001
DIAL 1-6
Dial 6; the SMS messages are shown in brief,
Dial the Message number to view the entire SMS message.
Dial #,
Dial 1 to Delete the message, 2 to Cancel, or 3 to Delete
all received Short text messages.
button,
/
PGM
to send your message.
button, and press the Volume down
B
ACK
31
).
Section 4.3.4
User Guide