Leaving A Message Wait; External Calls; Placing External Co/Voip Calls - iPECS LDP-9008D User Manual

LIP-7016D/7024D
To request a Callback (wait on-hook) for a busy station:
 Press
CALL BACK
To make a Voice Over announcement to a busy station:
 Dial #, after splash-tone, speak.

4.1.3 Leaving a Message Wait

If the called user does not answer or is in DND mode, you may leave a
Message Wait. The called user will receive a Message Wait indication;
the LED of the
OPERATION
To activate Message Waiting:
 Press the
4.2

External Calls

4.2.1 Placing external CO/VoIP calls

External calls are placed on CO/IP lines. These 'lines' are accessed
either by a button on the iPECS Phone assigned as a CO/IP line or by
dial codes. The CO/IP lines are grouped for different types of calls,
local, long distance, etc. Using the CO/IP line group code, you will be
able to access any line from the group. A Flex button on the iPECS
Phone assigned as a
Dial codes for access to CO/IP lines are:
Individual CO/IP line access—
Individual CO/IP line Access Code
CO/IP Group access—
CO/IP Group Access Code
and hang-up.
button will flash.
CALL BACK
button and hang-up.
CALL BACK
button lets you access a line from a group.
LOOP
88
88
801 – 820
801 – 872
8001 – 8200
801 – 824
801 - 872
Line No
01-42
001-200
001-400
001-600
01-80
001-240
System
iPECS-50 & 100
iPECS-300 & 600
iPECS-1200
iPECS-MG100
iPECS-MG300
17
User Guide
System
iPECS-50 & 100
iPECS-300
iPECS-600
iPECS-1200
iPECS-MG100
iPECS-MG300