Making, Receiving, And Managing Calls; Making An External Call - iPECS LIP-9040 Operation Manual

LIP-9040
Telephone Operation Guide
(a) [Menu]: Accesses the menu for display and changes to the IP phone configuration.
(b) [Transfer]: Transfers the current active call. The button also accesses the User Program (PGM)
menu or switches the dial pad input mode (ABC, abc, or 123). The dial pad mode displays in the
upper-right corner.
(c) [Speed]: Used to assign your speed dial numbers.
(d) [Message]: Use to access your voice mailbox.
(e) [DND] (Do Not Disturb): Use to activate DND so that your phone will not ring. This button also
deletes the last character of an input when in menu mode.
(f) [Headset]: Toggles use of the headset port on or off. When enabled a headset is used in place of
the speakerphone.
(g) [Hold]: Use to place a call on hold. Can also be used to access a held call. In menu mode, it saves
your inputs.
(h) [Mute]: Toggles audio from the microphone to the connected party on and off.
10. Navigation key
(a) Left: Use to select the previous group of softkeys when
display.
(b) Right: Use to select the previous group of softkeys when ► appears in the bottom-right
of the display.
(c) Up: Scrolls upward through the phone's menu options.
(d) Down: Scrolls downward through the phone's menu options.
11. OK key: Selects the highlighted choice when navigating through a menu. During a call
pop-up display of call information can be toggled on and off. When off the call information
will show at the top of the display.
12. Softkeys: These buttons are interactive, changing function based on the status of the phone.
The current function of each softkey is displayed on the screen directly above the softkey.

Making, Receiving, and Managing Calls

Making an external call

13. Press one of your Line buttons to reach an outside line.
14. Dial your phone number.
For support visit Support.Tel-Dat.com
◄ appears in the bottom-left of the
Page 2
email Telephony@Tel-Dat.com
or call (614) 923-8000