Placing A Call; Internal Calls; Placing Intercom Calls; Using Camp-On When Calling A Busy Station - iPECS LDP-9008D User Manual

LIP-7016D/7024D

4. Placing a call

4.1

Internal Calls

4.1.1 Placing Intercom calls

You can place calls to other stations in the system over the Intercom.
The call will ring, or for an ICM Voice Announce call, a splash tone will
be heard. Ring or Voice Announce is normally determined by settings
at the called station but you may change this by dialing '#' after placing
the call. By changing the mode, a Voice Announce call will ring or a
ringing ICM call will allow Voice Announce (toggle).
You can assign a Flex button for Direct Station Selection/Busy Lamp
Field (DSS/BLF). A
single button press. The button LED displays the other station's status,
ON, is busy, OFF is idle.
When you go off-hook, you may connect to another station or system
resource automatically. This Prime Line Preference may be immediate
or delayed allowing you to take other actions during the delay.
Otherwise, you may press another Flex button before going off-hook to
override Prime Line Preference.
If you go off-hook and take no action, Intercom dial-tone will time-out and,
after receiving Howler Tone, your phone will be placed out-of-service in
Intercom Lock-Out. You must hang-up to return to an idle state.
OPERATION
To place an Intercom call:
 Lift the handset,
 Dial the Intercom number of the desired station,
 On answer or Splash tone, speak to the called party.

4.1.2 Using Camp-On when calling a busy station

If your called party is busy, you may activate Camp-On, Callback or
Voice Over to the station. With Camp-On, wait off-hook for the called
station to answer. With Callback, the system will call you when the
busy station goes idle.
previously busy station.
If you are the Attendant or Secretary, you may activate Intrusion. You
may also use Step Call; dial the next station by dialing just the last digit
of the Intercom number.
OPERATION
To Camp-On (wait off-hook) for a busy station:
 Press * and await an answer.
/ button lets you call the other station with a
DSS BLF
After you answer, the system calls the
16
User Guide