Sending And Receiving Short Text Messages - iPECS LIP-9010 User Manual

 Dial 3 for VSF, 4 for external VM, 5 for Feature Server Voice Mail, etc.
 After the prompt enter your station number and password,
 Dial desired option codes,
 At completion of session, hang-up to return to idle.
 Press the programmed VOICE MAIL Flex button,
 Dial your Mail Box number and corresponding password to receive the
'Number of Messages' prompt,
 Dial desired option codes,
 At completion of session, hang-up to return to idle.
To access your Voice Mail Box from a Remote Location:
 Lift the handset,
 Dial the telephone number of a DISA CO line answered by the
VMIM/VSF Auto Attendant,
 At answer, dial # to receive the 'Mail Box & Password' prompt
 Dial the Mail Box and password to receive the 'Number of Messages'
prompt,
 Dial desired option codes,
 At completion of session, hang-up.
6.3

Sending and Receiving Short Text Messages

You can exchange short text messages (up to 80 alphanumeric characters)
with other iPECS display phone users. If there are messages, the message
button will be flashing. If the ring/message LED is set to MWI(Message Wait
Indication – In Web Admin – Station Data – Terminal Attributes – LCD
Display LED option), the ring/message LED will flash.
To send an SMS message to another iPECS display Phone:
 Press the TRANSFER(PGM) button,
 Dial 36 (SMS send code),
 Dial 1 to resend an existing message, or 2 to send a new or edit an
existing message,
 Enter the station range to receive the message, to send to a single
station enter the station number twice,
LIP-9000 Series User Guide - ST 47