Differential Ring Signals - iPECS LDP-9008D User Manual

LIP-7016D/7024D
only available when using the iPECS VMIM/VSF Voice Mail; a
button are required.
AME
OPERATION
In iPECS-Lik
To assign an AME button:
Ring Mode –
 /
TRANS PGM
Speaker Mode –
 /
TRANS PGM
To screen a call in Ring mode:
Press the flashing

the station speaker and stored in the voice mailbox (in the Speaker
mode, broadcast is automatic).
To stop the voice broadcast and leave the caller in Voice Mail:
 Press the illuminated
To talk with the caller and record the conversation in Voice Mail:
 Press the
To answer the call and cancel the voice message recording:
Press the illuminated

Voice Mail disconnected.
In iPECS-MG
To assign an AME button:
LED Blink Mode –

/
TRANS PGM
Speaker Hearing Mode –

/
TRANS PGM
3.4

Differential Ring Signals

When multiple phones in a small area ring, it can be difficult to tell which
are ringing.
differentiating ring from one phone to another. Four of the tones are
stored in the phone's permanent memory; the remaining ten tones are in
the system's memory. Four of these ten can be downloaded into the
phone memory for use as the 5
OPERATION
To download a Ring Tone from System memory:
+ + 564 + 0 +
FLEX
+ + 564 + 1 +
FLEX
AME
SPEAKER
button.
MUTE
AME
+ + 524 + 1 +
FLEX
+ + 564 + 2 +
FLEX
The iPECS Phone has 14 Ring Tones available for
/
HOLD SAVE
/
HOLD SAVE
button, the caller's voice is broadcast over
button.
button, the caller is connected and the
/
HOLD SAVE
/
HOLD SAVE
th th
to 8
Ring Tone.
9
User Guide
and
M
UTE