Setting Features & Flex Buttons; Entering Station Program Data; Assigning Features To Flex Buttons - iPECS LDP-9008D User Manual

LIP-7016D/7024D
10. Setting Features & Flex buttons

10.1 Entering Station Program Data

A special code set is available for iPECS Phone users to assign certain
attributes such as Authorization Codes (Passwords). After entering the
User Program mode, you dial the codes to select the attribute and
setting. Once selected, the setting is saved.
Program codes, the feature/function and any input required are given in
B. In some cases, you enter these codes as part of Flex
Appendix
button assignments.
OPERATION
To assign user programmable attributes to your station:
 Press
TRANS
 Dial desired User Program codes shown in
 Press
HOLD

10.2 Assigning Features to Flex Buttons

You may assign features and functions to the Flex buttons on your
iPECS Phone. If allowed, you may even assign CO/IP lines to the Flex
buttons.
Flex buttons may be assigned for most features providing One-Touch
feature activation (e.g., a Flex button may be assigned to access the
Account Code
one-touch account code button).
Features that may be assigned to a Flex button include:
DSS/BLF—enter station number,
Dial—enter Station/System Speed dial bin number,
Speed
Flex Numbering Plan—enter Flex Numbering Plan code (refer to
Appendix
User Program Code—press
code (refer to
CO/IP Line—enter the CO/IP line or group number.
OPERATION
To assign a feature to a Flex button:
 Press
TRANS
 Press the desired Flex button,
 Dial desired code and required inputs. For User Program codes
Appendix
 Press
HOLD
/ ,
PGM
/
.
SAVE
feature and may include the Account code digits, as a
A),
Appendix B)
/ ,
PGM
B), first press the
/ .
SAVE
/ and enter a User Program
TRANS PGM
/ ,
TRANS PGM
47
A list of the User
Appendix B,
User Guide