iPECS LDP-9008D User Manual page 135

LIP-8012E & LIP-8024E Gigabit Phone
To configure VPN:
•
•
•
•
•
•
•
•
•
To set default Config. settings:
•
•
To exit Config. settings:
•
•
•
In Network Config. Menu, use VOL   buttons to locate the
DNS Address menu.
Enter DNS address in DNS ADDRESS menu
Use VOL   buttons to locate the VPN configuration screen
(shown),
VPN ?
[ENABLED] – CHANGE[#]
Enable in VPN Menu and press the Hold button.
Following steps are available when VPN is enabled.
Enter VPN Server address in VPN SERVER IP menu and
press the Hold button.
Enter TCP/UDP port number for both local and remote in VPN
PORT and press the Hold button. The default value is 1194.
In VPN USER ID, enter ID and press the Hold button.
In VPN USER PASSWORD, enter Password and press the
Hold button.
In Network Config. Menu, use VOL   buttons to locate the
Default Config. Screen (shown),
SET DEFAULT CONFIG(DOT:*)
•
Press the * key.
Press the S
PEAKER
Press the * key to exit,
OR
Press the # key to Reset/Reboot the phone with new setting.
button,
13
User Guide