Setting Up A Conference Room - iPECS LDP-9008D User Manual

LDP-9008D & LDP-9030D
To establish an Unsupervised Conference:
•
•
•
To retrieve an Unsupervised Conference:
•
•

5.4.1 Setting up a Conference Room

In addition to establishing a Conference, up to 9 Conference
Rooms can be set up. When setting up a Conference Room, a
password can be designated for invited parties (internal and
external parties) to use for accessing the established
Conference Room.
To set-up a Conference Room:
•
•
•
•
•
To join a Conference Room:
•
•
•
•
•
To Transfer a call to a Conference Room:
•
•
•
•
To delete a Conference Room:
•
•
•
•
•
Establish conference with two external parties,
Select the
Conf Soft button,
Hand-up handset.
Lift the handset,
Select the
Conf
Press the
TRANS
Dial 53 to create a Conference Room,
Dial the desired Conference Room number (1-9),
If desired enter a password for the Conference Room (up
to 12 digits),
Press
/
HOLD SAVE
Lift the handset,
Dial 59 (Conference Room entry code),
Dial the Conference Room Number,
Dial the Conference Room password.
Or press a preprogrammed conference flex key
Press the Trans/PGM button
Dial 59 (Conference Room entry code),
Or press a preprogrammed conference flex key
Hang up
.
Press the
TRANS
Dial 54 (Conference Room delete code),
Dial the Conference Room number (1-9),
Dial the Conference Room password,
Press
/
HOLD SAVE
Soft button.
button,
/
PGM
to establish the Room.
,
button,
/
PGM
to delete the Conference Room.
27
User Guide
,