Using A Bluetooth Wireless Headset - iPECS LDP-9008D User Manual

LIP-7016D/7024D
2.3

Using a Bluetooth Wireless Headset

The iPECS LIP-7024D may be equipped with the BTU (Bluetooth Unit)
option that lets you use a Wireless headset such as a Jabra BT-200, BT-
250 or Plantronics M3000. Using a headset permits you to move freely
around the phone within approximately 10 meters and maintain a
conversation. Before using the headset, the headset must be "paired"
with the BTU, and then the headset must be enabled for use.
Operation of the iPECS LIP-7024D with the headset is the same as with
the Speakerphone; merely use the Speaker button to go ON and OFF-
hook.
NOTE—during the pairing operation, the headset and phone should
be as close as possible but not more than 1 meter apart.
OPERATION
To pair the wireless headset to the BTU:
 Press the
 Dial 3,
 Press the
To enable/disable the wireless headset:
 Press the
 Dial 4,
 Press the
To unpair the headset:
 Press the
 Dial 3,
 Press the
/ button,
TRANS PGM
/ button.
HOLD SAVE
/ button,
TRANS PGM
/ button.
HOLD SAVE
/ button,
TRANS PGM
/ button.
HOLD SAVE
6
User Guide