Waiting For The Next Available Co/Ip Line - iPECS LDP-9008D User Manual

LIP-7016D/7024D
Any CO/IP Line access—
When dialing on a CO line, which uses pulse style signals, you may
activate Dial Pulse to Tone Switchover changing to DTMF style dialing
for banking services, etc.
When placing an IP call, you must dial an IP address using '*' in place of
the dot.
If Least Cost Routing is set-up, the number you dial will be analyzed
and the system will place the call on the least expensive route.
You may be assigned Dialing and/or CO/IP Line Access Restrictions,
in which case you will receive error tone if you attempt to dial or access a
restricted number/CO/IP line.
Service (COS), which establish dialing restrictions, may vary during Day
and Night operation (Day/Night COS).
You may need to enter an
which case you will receive a second dial tone.
Your external calls may be subject to Call Time Restrictions, you will
receive a Call Warning Tone prior to disconnect.
NOTE—In the event of an emergency, assigned Emergency
numbers (ex., a 911 call) may be dialed from any station in the
System, regardless of a Station's dialing restrictions (COS).
OPERATION
To place an external call:
Lift the handset,

 Select/Dial the CO/IP line/group,
Dial the desired number.


4.2.2 Waiting for the next available CO/IP line

If all the lines connected to your system are busy, you will receive an All
Trunks Busy signal. You may request to be notified when a line becomes
free.
OPERATION
To activate a queue if the selected/dialed line is busy:
 Select/dial a busy CO/IP line button,
 Press the C
 Return to an idle state by going on-hook; when the line comes
available, the Station will be notified with ringing.
9
Authorization code
B button,
ALL ACK
CO/IP line and Station Class Of
before placing calls, in
18
User Guide