Power Fail Transfer; System Voice Memo - iPECS LDP-9008D User Manual

LIP-7016D/7024D
Door Bell—a unique Door Bell Ring (single tone burst) may be received
each time the external contact is activated. A system contact also can
be assigned to act as a Door Open contact.
OPERATION
To terminate the Alarm signal:
 Dial 565.
To activate the Door Open contacts:
 Lift the handset,
 Dial Door Open code, #* and contact number 1-4.
NOTE—Contacts 3 & 4 are only available in the iPECS -300 & 600.
—Contacts 1 is available in the iPECS -MG.
8.7

Power Fail Transfer

When AC power to the system fails, back-up operation may be provided
with back-up batteries or Power Fail Transfer (PFT).
back-up is provided the station will operate normally.
implemented, an SLT is connected to a CO line by the system. This
SLT can be used as any normal SLT, providing service while power is
out.
8.8

System Voice Memo

The integrated Voice Mail modules incorporate several Voice Memos to
provide Station Users with general information such as station number,
date, time, and feature status.
speaker of the iPECS Phone and over the handset for SLTs.
For the Station Status Memo, the following items are reported:
ICM Signaling Mode (Handsfree/Tone/Privacy)
Station IP Address
Station Mac Address
Number of messages x (x: number of all message waiting)
Wake-Up Time (hh:mm)
Do Not Disturb
Forwarded to station xxx
Forwarded to speed bin xxx
Queued CO/IP line xxx
Locked (Temporary COS)
COS x
NOTE—only activated features are announced.
Voice Memos are heard over the
43
User Guide
When battery
When PFT is