Waiting For The Next Available Co/Ip Line; Account Codes: Tracking External Calls For Billing - iPECS LDP-9008D User Manual

LIP-8012E & LIP-8024E Gigabit Phone
To place an external call:
•
Lift the handset,
•
Dial the CO/IP line/group,
•
Dial the desired number.
To activate a queue if the selected/dialed line is busy:
•
Select the desired CO/IP line button; when the busy notification
is returned, press the MSG button,
•
Return to an idle state by going on-hook; when the line is
available, the Station will be notified (ringing).
In iPECS-eMG80
To enter an Account Code before the call:
•
Lift the handset,
•
Press the assigned
•
Dial the Account Code (1-12 digits),
•
Press *, Intercom dial tone is heard,
•
Place the CO/IP call as normal.
To enter an Account Code during a call:
•
Press the assigned
•
Dial the Account Code (1-12 digits),
•
Press *.
4.2.2

Waiting for the next available CO/IP line

If all the lines connected to your system are busy, you
will receive an All Trunks Busy signal. You may request
to be notified when a line becomes free.
4.2.3

Account Codes: Tracking External calls for billing

In some cases, you or your company may desire to
track calls for billing or other purposes. You may enter
an Account Code, which is output from the system to a
printer in the SMDR report. You may have an
Flex button (refer to
Code
buttons).
button,
ACCOUNT CODE
button,
ACCOUNT CODE
33
Assigning features to Flex
User Guide
Account