Receiving Calls; Answering A Call While Idle - iPECS LDP-9008D User Manual

LDP-9008D & LDP-9030D
3.
R
ECEIVING CALLS

3.1 Answering a Call While Idle

There are 3 basic types of incoming calls; internal/external
ringing calls, Intercom Voice Announce calls, and
recalls.
Your phone may be assigned Ringing Line Preference; in this
case, calls that ring are answered by lifting the handset.
Otherwise, you must press the flashing Flex button.
External calls to a Phone will appear under the CO/IP line or a
LOOP button.
External calls are from CO lines or VoIP channels that are
programmed to ring at your phone. For external calls, Delay
Ring may be assigned allowing others to answer the call
before the call rings at your phone.
Calls can be forwarded in some manner from another user; if
providing call coverage for other users, you may also receive
Station Call Coverage calls.
Calls placed on Hold, including Transfers, parked calls, etc. will
recall if left on hold for too long.
ICM Voice Announce calls are answered based on the ICM
Signaling mode at the receiving phone; in Hands-free (HF)
mode, after the splash tone and announcement, speak
normally into the microphone. In the Privacy (PV) mode, lift the
handset to respond. The ICM Signaling mode can be
assigned in
The LCD will display the calling number or, if available, the
name of the station or CO/VoIP line, CO Line Name Display.
To answer a call ringing at your phone:
•
To respond to an Intercom Voice Announce call:
•
OR
•
Station
Lift the handset or press the flashing Flex button (as
needed), the call will be connected.
In HF mode, simply speak as normal into the microphone,
In PV mode, lift the handset to respond.
Programming.
7
User Guide
Hold