Using Isdn Supplementary Services; Activating Isdn Caller Id Restriction - iPECS LDP-9008D User Manual

LIP-8012E & LIP-8024E Gigabit Phone
To activate Keypad Facility operation:
•
Press the
•
Dial as desired.
To deactivate Keypad Facility operation:
•
Press
OR
•
Press a Feature or Flex button.
While on an ISDN CO line, to access ISDN Supplementary
services:
•
Press Flash,
•
Press H
desired feature.
To restrict Caller ID:
•
Lift the handset,
•
Press programmed CLIR/COLR button to place call.
KEYPAD FACILITY
KEYPAD FACILITY
9.2.2

Using ISDN Supplementary Services

ISDN service providers may incorporate features similar
to those of Centrex. These ISDN Supplementary
services are provided on a subscription basis, and as
with Centrex, are accessed using the
an iPECS phone.
Using supplementary services an ISDN line can be
placed on Hold and a second call placed on the line.
You may then alternate between the two held calls
(Broker Call) using the hold button. An ISDN line
conference can be established using the Flash and
Conf Soft buttons. A conference can also be placed on
hold.
, Conf, or CO line button to activate the
/S
OLD AVE
9.2.3

Activating ISDN Caller ID Restriction

iPECS Phone users can restrict the transmission of
Caller ID to the far-end. This may be a subscription
service of your carrier. Separate Flex buttons are
required to activate outgoing, Connected Line (COL),
and incoming, Calling Line ID (CLID) restriction.
button to switch to keypad mode,
,
63
User Guide
Flash button on