Sending And Receiving Short Text Messages - iPECS LIP-7008D User Manual

LIP-7008D
OPERATION
To retrieve Voice Mail locally using a Flex button:
• Press the VM Flex button,
• Dial your Mail Box number and corresponding password to receive
the 'Number of Messages' prompt,
• Dial desired option codes,
• At completion of session, hang-up to return to idle.
To retrieve Voice Mail locally using the
• Press the flashing
• Dial 3 for VMIM/VSF, 4 for external VM or 5 for Feature Server
Voice Mail,
• After the prompt enter your station number and password, to receive
the 'Mail Box & Password' prompts sequentially,
• Dial desired option codes,
• At completion of session, hang-up to return to idle.
To access Voice Mail Box from a Remote Location:
• Lift the handset,
• Dial the telephone number of a
by the VMIM/VSF Auto Attendant,
• Upon answer, dial # to receive 'Mail Box & Password' prompt,
• Dial the Mail Box and corresponding password to receive the
'Number of Messages' prompt,
• Dial desired option codes, then hang-up.
6.4

Sending and Receiving Short Text Messages

You can exchange short text messages (max. 100 alphanumeric
characters) with other iPECS display phone users. These messages will
activate the
Phone LCD.
OPERATION
To send an SMS message to another iPECS display phone user:
• Press the
• Dial 36 (SMS send code),
• Dial 1 to resend an existing message, or 2 to edit an existing
message or to send a new one,
• Dial the station range to receive the message (to send to a single
station enter the station number twice),
CALL BACK
ST CL VS VM FS
001 001 005 006 001 004
button LED and are displayed on the iPECS
CALL BACK
/ button,
TRANS PGM
CALL BACK
button, the LCD shows the display,
MS
CO line assigned for answer
DISA
27
User Guide
button: