Using Isdn Supplementary Services; Activating Isdn Caller Id Restriction - iPECS LDP-9008D User Manual

LDP-9008D & LDP-9030D
To activate Keypad Facility operation:
•
•
To deactivate Keypad Facility operation:
•
•

9.2.2 Using ISDN Supplementary Services

ISDN service providers may incorporate features similar to
those of Centrex. These ISDN Supplementary services are
provided on a subscription basis, and as with Centrex, are
accessed using the
Using supplementary services an ISDN line can be placed on
Hold and a second call placed on the line. You may then
alternate between the two held calls (Broker Call) using the
hold button. An ISDN line conference can be established using
the Flash and Conf Soft buttons. A conference can also be
placed on hold.
While on an ISDN CO line, to access ISDN
Supplementary services:
•
•

9.2.3 Activating ISDN Caller ID Restriction

LDP-9000 Series Phone users can restrict the transmission of
Caller ID to the far-end. This may be a subscription service of
your carrier. Separate Flex buttons are required to activate
outgoing, Connected Line (COL), and incoming, Calling Line ID
(CLID) restriction.
To restrict Caller ID:
•
•
Press the
KEYPAD FACILITY
Dial as desired.
Press
KEYPAD FACILITY
OR
Press a Feature or Flex button.
Press Soft button,
Flash
Press
H /S
OLD AVE
desired feature.
Lift the handset,
Press programmed
button to switch to keypad mode,
,
Flash button on a Phone.
CO line button to activate the
, Conf, or
/
CLIR COLR
40
button to place call.
User Guide