Network Config - iPECS LDP-9008D User Manual

LIP-8012E & LIP-8024E Gigabit Phone
To access Network Config. settings:
•
•
•
•
•
To configure 802.1x:
•
•
•
•
To set LLDP:
•
•
2.1.4

Network Config.

The User can review the current network configuration
or modify a new phone network configuration.
Press M button and 4(iPECS-LIK)/2(iPECS SBG-1000,
ENU
iPECS-MG),
Enter the password (default=147*); the following will display:
MFIM #[1/2] ?
MFIM #1 - CHANGE[#]
Press the # key to toggle between multiple profiles (MFIM),
Press the VOL   buttons to advance to the next network
configuration item,
Press the H /S
OLD
In Network Config. Menu, use VOL   buttons to locate the
802.1x configuration screen (shown),
802.1x ?
[ENABLED] – CHANGE[#]
Enable in 802.1x menu and press the Hold button.
Enter ID in 802.1x USER ID menu (It appears when 802.1x is
enabled.) and press the Hold button.
Enter Password in 802.1x PASSWORD menu (It appears when
802.1x is enabled.) and press the Hold button.
In Network Config. Menu, use
LLDP configuration screen (shown),
•
•
Enable in LLDP? menu and press the Hold/Save button.
button to save each setting.
AVE
VOL
LLDP?
[ENABLED] – CHANGE [#]
12
  buttons to locate the
User Guide