Sending And Receiving Short Text Messages - iPECS LIP-8040E User Manual

LIP-8040E Gigabit Phone
To access your Voice Mail Box from a Remote Location:
•
Lift the handset,
•
Dial the telephone number of a DISA CO line answered by the
VMIM/VSF/VMIB Auto Attendant,
•
At answer,
dial # to receive the 'Mail Box & Password' prompt
(iPECS-LIK & SBG),
dial 523 (VMIB Access Code)(iPECS-MG),,
•
Dial the Mail Box and password to receive the 'Number of
Messages' prompt,
•
Dial '*' (iPECS-MG),
•
Dial desired option codes,
•
At completion of session, hang-up.
6.3

Sending and Receiving Short Text Messages

In iPECS-LIK
To send an SMS message to another iPECS display Phone:
•
Press the
•
Dial 36 (SMS send code),
•
Dial 1 to resend an existing message, or 2 to send a new or
edit an existing message,
•
Enter the station range to receive the message, to send to a
single station enter the station number twice,
•
Dial your message using 2 key strokes for each character (refer
to Character Entry Chart(iPECS-LIK) in
•
Press
You can exchange short text messages (up to 100
alphanumeric characters) with other iPECS display
phone users. If there are messages, the message icon
will be displayed on the LCD screen in LIP-8024D. If the
ring/message LED is set to Message Wait Indication
(PGM111-FLEX10), the ring/message LED will flash.
/ button,
TRANS PGM
/ to send your message.
HOLD SAVE
Section
51
User Guide
4.3.4).