Using The Speakerphone - iPECS LDP-9008D User Manual

LIP-8012E & LIP-8024E Gigabit Phone
2.2

Using the Speakerphone

To use the Speakerphone to answer or place a call:
•
Press
the speaker and the microphone.
To control the volume of the Speakerphone or handset:
• Press the ▼
To Mute the microphone:
•
Select the M
To turn off Mute (turn the microphone ON):
•
Press the M
To activate Group Listen while on an active handset call:
•
Press the
Activate the iPECS Speakerphone at any time (except
forPaging) in place of lifting the handset to receive or
place calls.
Additionally, you may switch between the handset and
Speakerphone during a call. By keeping the handset
Off-hook, the Group Listen feature is activated, which
provides incoming audio over the speaker with outgoing
audio from the handset. This permits a local 'group' to
listen to both sides of the conversation without
interfering with the conversation.
While in a conversation using the Speakerphone, Mute
the microphone using the M
active, the M
off Mute, press the M
With Auto Speaker Select, activating or accessing a
feature by pressing its button will activate the
Speakerphone automatically.
When using a Headset, the
ON/OFF-hook state for the phone.
, the phone goes off-hook and sends audio to
SPEAKER
▲ button.
VOLUME
button.
UTE
button.
UTE
button.
SPEAKER
UTE
button LED will be illuminated. To turn
UTE
button again..
UTE
SPEAKER
15
User Guide
button. When Mute is
button controls the