Using Answering Machine Emulation (Ame) - iPECS LDP-9008D User Manual

LDP-9008D & LDP-9030D

3.3 Using Answering Machine Emulation (AME)

When a call is connected to your voice mail, you can screen
the call as with a normal Answering Machine. The caller's
voice is played over your speaker while the message is being
recorded. There are two methods of notification and call
screening provided, LED blink mode or Speaker hearing mode.
Ring Mode —the Answering Machine Emulation (AME) Flex
button will flash to notify you of a call. You may press the Flex
button to hear the caller as the voice message is stored.
Speaker Mode —when the call is sent to the voice mailbox,
the caller's voice is automatically broadcast over the speaker of
your Phone.
You may terminate screening, leaving the caller in voice mail to
record a message, talk with the caller and record the
conversation in the mailbox, or answer the call and disconnect
the Voicemail. The AME feature is only available when using
the VSF Voice Mail; a AME button should be programmed
To program an AME button:
• Press Trans/PGM
To screen a call in Ring mode:
•
To stop the voice broadcast and leave the caller in
Voice Mail:
•
To talk with the caller and record the conversation
in Voice Mail:
•
To answer the call and cancel the voice message
recording:
•
Manual Ring Mode
Press the desired Flex button + 564 + 0 + Hold/Save
Automatic Speaker Mode
Press the desired Flex button + 564 + 1 + Hold/Save
Press the flashing
over the station speaker and stored in the voice
mailbox (in the Speaker hearing mode, broadcast is automatic)
Press the illuminated
Press the
MUTE
Press the illuminated
and the Voice Mail disconnected.
button, the caller's voice is broadcast
AME
button.
SPEAKER
button.
button, the caller is connected
AME
9
User Guide