Table of Contents
Advertisement
LIP-8002E/2AE
2. Receiving
Calls
In iPECS-LIK, iPECS SBG-1000, iPECS-MG
To answer a call ringing at your phone:
•
To respond to an Intercom Voice Announce call:
•
2.2 Responding to a Call While Busy
2. Receiving Calls
2.1 Answering a Call While Idle
There
internal/external calls, Intercom Voice Announce calls,
and
Hold
Your
Preference; in this case, calls that ring are answered
by lifting the handset. Otherwise, you must press the
flashing Flex button.
External calls are from CO lines or VoIP channels that
are programmed to ring at your phone. For external
calls, Delay Ring may be assigned allowing others to
answer the call before the call rings at your phone.
Calls can be forwarded in some manner from another
user; if providing call coverage for other users, you may
also receive Station Call Coverage calls.
Calls placed on Hold, including Transfers, parked calls,
etc., will Recall if left on hold for too long.
ICM Voice Announce calls are answered based on the
ICM Signaling mode at the receiving phone; in Hands-
Free
announcement, speak normally into the microphone. In
the Privacy (PV) mode, lift the handset to respond. The
ICM Signaling mode can be assigned in
Programming.
Lift the handset, the call will be connected.
Lift the handset to respond.
While you are busy on another call, you may receive a
Muted
announcements.
speaker of your Phone indicating a Call Waiting. You
also may receive Camp On tones, a burst of tone on top
are
3
basic
recalls.
phone
may
be
(HF)
mode,
after
Ring,
Camp-On
Muted Ring is provided over the
5
types
of
incoming
assigned
Ringing
the
splash
tones,
or
User Guide
calls;
Line
tone
and
Station
Voice-Over
Hide quick links:
Advertisement
Table of Contents
