Call Park: Placing A Call On Hold To Page; Two-Way Record: Recording A Call - iPECS LDP-9008D User Manual

LIP-8012E & LIP-8024E Gigabit Phone
5.5

Call Park: Placing a call on Hold to Page

In iPECS-eMG80
To park an active external call:
•
Press
•
Dial the Park Orbit
(601-619)
•
Return to idle.
To retrieve a parked call:
•
Lift the handset,
•
Dial the Park Orbit.
5.6

Two-Way Record: Recording a call

If your system administrator has enabled call recording, you may record
an active external conversation in your
To activate Two-Way Record while on a CO/IP call:
•
Use the Navigation button to display the next Menu and select
the Record Soft button, record warning tone is heard and
recording starts.
To stop Two-Way Record while on a CO/IP call:
•
Use the Navigation button to display the next menu, and select
the Record Soft button or,
•
Hang-up, return to idle.
A user may transfer an active CO/IP call to a special
holding location (Park Orbit), which can be accessed
easily from any station in the system. Typically, this
feature is used with
a parked call.
Parked calls are subject to
Park timer.
/ ,
TRANS PGM
Paging to notify the desired user of
Hold Recall
Voice Mail Box
.
45
User Guide
after the Call