Sending And Receiving Short Text Messages - iPECS LIP-9000 Series User Manual

To retrieve Voice Mail locally using a flexible button:
 Press the programmed VOICE MAIL flexible button,
 Dial your station number and corresponding password to receive the
'Number of Messages' prompt,
 Follow the voice prompts to manage your messages,
 At completion of your session, hang-up to return to idle.
To retrieve Voice Mail locally using the MSG button:
 Press the MSG button, the LCD shows the Message Summary display:
MWI(05) VMS(002) SMS(02)
ENTER (MWI:1, VMS:2, SMS:3)
 Dial 2 to access Voice Mail.
 After the prompt enter your station number and password and *,
 Follow the voice prompts to manage your messages,
 At completion of your session, hang-up to return to idle.

6.3 Sending and Receiving Short Text Messages

You can exchange short text messages (up to 80 alphanumeric characters)
with other iPECS display phone users. If you have short text messages, the
message button will be flashing. If the ring/message LED is set to MWI, the
ring/message LED will flash.
To send an SMS message to another iPECS display Phone:
 Press the MENU button,
 Dial 43, the SMS send code,
 Enter the station to receive the message.
 Press the ADD Soft button to append the next station number and Dial
the station number.
 Press the FINISH Soft button.
 Enter your message using the dial pad. Refer to "1.8 Phone Entering
Text" for details on entering text.
 Press the HOLD(SAVE) button to send your message.
To view your received Short text messages:
 Press the MSG button, the LCD will display the Message Summary
LIP-9000 Series User Guide - CM- Issue 1.1 39