Using The Speakerphone - iPECS LDP-9008D User Manual

LDP-9008D & LDP-9030D

2.2 Using the Speakerphone

Activate the Speakerphone at any time (except for Paging) in
place of lifting the handset to receive or place calls.
Additionally, you may switch between the handset and
Speakerphone during a call. By keeping the handset Off-hook,
the Group Listen feature is activated, which provides incoming
audio over the speaker with outgoing audio from the handset.
This permits a local 'group' to listen to both sides of the
conversation without interfering with the conversation.
While in a conversation using the Speakerphone, Mute the
microphone using the M
M
UTE
the M
With Auto Speaker Select, activating or accessing a feature
by pressing its button will activate the Speakerphone
automatically.
When using a Headset, the
ON/OFF-hook state for the phone.
To use the Speakerphone to answer or place a call:
•
To control the volume of the Speakerphone or
handset:
•
To Mute the microphone:
•
To turn off Mute (turn the microphone ON):
•
To activate Group Listen while on an active handset
call:
•
button LED will be illuminated. To turn off Mute, press
button again.
UTE
Press
SPEAKER
to the speaker and the microphone.
Press the ▼
VOLUME
Select the M
UTE
Press the M
UTE
Press the
SPEAKER
button. When Mute is active, the
UTE
SPEAKER
, the phone goes off-hook and sends audio
▲ button.
button.
button.
button.
6
button controls the
User Guide