BACK
Dial 3 for the built-in Voice Mail (VSF MSG), 4 for an external Voice Mail
system (VMS MSG), or 5 for the iPECS Feature Server Voice Mail
(UMS MSG).
After the prompt enter your station number and password,
Follow the voice prompts to manage your messages,
At completion of your session, hang-up to return to idle.
To access your Voice Mail Box from a Remote Location:
Call the telephone number of the outside line assigned for answer by
the Auto Attendant,
At answer, dial # to receive the 'Station & Password' prompt
Dial your station number and password to receive the 'Number of
Messages' prompt,
Follow the voice prompts to manage your messages,
At completion of your session, hang-up.
6.3 Sending and Receiving Short Text Messages
You can exchange short text messages (up to 80 alphanumeric characters)
with other iPECS display phone users. If you have short text messages, the
message button will be flashing. If the ring/message LED is set to MWI, the
ring/message LED will flash.
To send an SMS message to another iPECS display Phone: (for
UCP/eMG)
Press the TRANSFER(PGM) button,
Dial 36, the SMS send code,
Dial 1 to resend an existing message, or 2 to send a new or edit an
existing message,
Enter the station range to receive the message, to send to a single
station, enter the station number twice,
Enter your message using the dial pad. Refer to "1.7 Entering Text" for
details on entering text.
Press the HOLD(SAVE) button to send your message.
LIP-9000 Series User Guide - ST- Issue 1. 5
OK
41