Responding To A Call While Busy; Using Answering Machine Emulation (Ame); Differential Ring Signals - iPECS LIP-9010 User Manual

3.2

Responding to a Call While Busy

While you are busy on another call, you may receive a Muted Ring, Camp-
On tones, or Voice-Over announcements. Muted Ring is provided over the
speaker of your Phone indicating a Call Waiting. You also may receive
Camp On tones, a burst of tones on top of the existing call, as an indication
of another call waiting.
While busy, certain stations can activate Voice-Over to your phone. In this
case, audio is received from both the active call and the Voice Over
announcement at the same time.
Respond to any of these Off-hook Signals in one of several ways; place
the existing call on Hold and respond to the new incoming call, activate
One-time DND, send a Silent Text Message, or ignore the new call.
Silent Text Message requires a TEXT MESSAGE button (not available on
a SLT or other non-display terminal).
The Attendant or Secretary may use Intrusion to announce a call while you
are busy.
3.3

Using Answering Machine Emulation (AME)

When a call is connected to your voice mail, you can screen the call as if
using a normal Answering Machine. The caller's voice is played over your
speaker while the message is being recorded. There are two methods of
notification and call screening provided, Ring or Speaker mode.
Ring mode — the Answering Machine Emulation (AME) Flex button will
flash to notify you of a call. You may press the Flex button to hear the caller
as the voice message is stored.
Speaker mode — when the call is sent to the voice mailbox, the caller's
voice is automatically broadcast over the speaker of your iPECS Phone.
You may terminate screening, leaving the caller in voice mail to record a
message, talk with the caller and record the conversation in the mailbox, or
answer the call and disconnect the Voicemail. The AME feature is only
available when using the iPECS UVM/UVMU Voice Mail;
button should be programmed (refer to iPECS-UCP Manual).
3.4

Differential Ring Signals

When multiple phones in a small area ring, it can be difficult to tell which are
ringing. The iPECS Phone has 16 Ring Tones available for differentiating
one phone's ringing from another.
24
a MUTE and AME
LIP-9000 Series User Guide - ST