Using Answering Machine Emulation (Ame); Differential Ring Signals - iPECS 1000i Series User Manual

1000i Series IP Phone (LME)
User Guide

Using Answering Machine Emulation (AME)

3.3
When your phone is allowed AME, your calls are connected to your voice mail directly, and, like a normal
Answering Machine, the caller's voice is played over your Speaker as it is recorded in the mailbox. Thus, you
can screen the call before answering. There are two methods of notification and call screening provided, Ring
or Speaker mode.

Ring mode — In the Ring mode, the AME flexible button will flash to notify you of a call. You may
press the flexible button to hear the caller as the voice message is recorded.

Speaker mode — In the Speaker mode, the caller's voice is broadcast over the Speaker of your iPECS
Phone automatically.
To screen a call in Ring mode:
✓ Press the flashing AME button, the caller's voice is broadcast over the station Speaker and stored in the
voice mailbox. In the Speaker mode, broadcast is automatic.
To stop the voice broadcast and leave the caller in Voice Mail:
✓ Press the illuminated Speaker button.
To talk with the caller and record the conversation in Voice Mail:
✓ Press the MUTE button.
To answer the call and cancel the voice message recording:
✓ Press the illuminated AME button, the caller is connected, and the Voice Mail disconnected.

Differential Ring Signals

3.4
When multiple phones in a small area ring, it can be difficult to tell which are ringing. The iPECS Phone has 16
Ring Tones available for differentiating one phone's ringing from another.
This feature can also be used to differentiate internal and external callers. Of the 16 tones,four can be
downloaded from the system and changed.
To download a Ring Tone from the System:
Press the MENU button and Dial 2 for Ring Tones.
1)
Dial 3 for Ring download.
2)
Dial the phone's memory location to receive the Ring (5-8).
3)
Dial 0-9 for the desired ring number; the selected ring is heard.
4)
Dial 1 to download the ring to your phone and dial 2 to return to the previous menu.
5)
To select a Ring Tone from phone memory:
Press the MENU button and Dial 2 for Ring Tones.
1)
Dial 1 for internal call ring or 2 for External call ring.
2)
Dial 1 for Keyset Ring Source.
3)
Dial 01-16 for the desired ring; the selected ring is heard.
4)
Press the HOLD(SAVE) button or the OK Softkey to complete the selection.
5)
22
Issue 1.2