Responding To A Call While Busy; Using Answering Machine Emulation (Ame) - iPECS LIP-8012D User Manual

LIP-7016D/7024D
2.2

Responding to a Call While Busy

While you are busy on another call, you may receive Muted Ring, Camp-
On tones, or Voice-Over announcements. Muted Ring is provided over
the speaker of your Phone indicating a Call Waiting. You also may
receive Camp On tones, a burst of tones on top of the existing call, as
an indication of another call waiting.
While busy, certain stations can activate Voice-Over to your phone. In
this case, audio is received from both the active call and the Voice Over
announcement at the same time.
Respond to any of these Off-hook Signals in one of several ways; place
the existing call on Hold and respond to the new incoming call, activate
One-time DND, send a
Silent Text Message requires a
sent to a SLT or other non-display terminal.
The Attendant or Secretary may use Intrusion to announce a call while
you are busy.
OPERATION
To answer a Call Waiting:

Press
HOLD

Press the flashing
To activate One-time DND:

Press the DND button.
To send a Silent Text Message:

Press the programmed

Select the desired message to send.
2.3

Using Answering Machine Emulation (AME)

When a call is connected to your voice mail, you can screen the call as
with a normal Answering Machine. The caller's voice is played over your
speaker while the message is being recorded. There are two methods of
notification and call screening provided, Ring or Speaker mode.
Ring mode—the AME (Answering Machine Emulation) Flex button will
flash to notify you of a call. You may press the Flex button to hear the
caller as the voice message is stored.
Speaker mode—when the call is sent to the voice mailbox, the caller's
voice is automatically broadcast over the speaker of your iPECS Phone.
You may terminate screening, leaving the caller in voice mail to record a
message, talk with the caller and record the conversation in the mailbox,
or answer the call and disconnect the Voicemail. The AME feature is
only available when using the iPECS VMIM/VSF Voice Mail; a
button are required.
AME
Silent Text
/ and/or,
SAVE
/
CO IP LINE
TEXT MESSAGE
Message, or ignore the new call.
TEXT MESSAGE
button.
button,
10
User Guide
button, and cannot be
M
and
UTE