Using Answering Machine Emulation (Ame) - iPECS LIP-7008D User Manual

LIP-7008D
While busy, certain stations can activate Voice Over to your phone. In
this case, audio is received from both the active call and the Voice Over
announcement at the same time.
Respond to any of these Off-hook Signals in one of several ways: place
the existing call on Hold and respond to the new incoming call, activate
DND, send a
One-time
Flex button is required for One-Time DND.
DND
Silent Text Message requires a
sent to a SLT or other non-display terminal.
The Attendant or Secretary may use Intrusion to announce a call while
you are busy.
OPERATION
To answer a Call Waiting:
• Press the
• Press the flashing
To activate One-time DND:
• Press the
To send a Silent Text Message:
• Press the programmed
• Select the desired message to send.
3.3

Using Answering Machine Emulation (AME)

When a call is connected to your voice mail, you can screen the call as
with a normal Answering Machine. The caller's voice is played over your
speaker while the message is being recorded. There are two methods of
notification and call screening provided, Ring or Speaker mode.
In the Ring mode, the AME (Answering Machine Emulation) Flex button
will flash to notify of a call. You may press the Flex button to hear the
caller as the voice message is stored. In the Speaker mode, when the
call is sent to the voice mailbox, the caller's voice is automatically
broadcast over the speaker of your iPECS Phone.
You may terminate screening, leaving the caller in voice mail to record a
message, talk with the caller and record the conversation in the mailbox,
or answer the call and disconnect the Voice Mail. The AME feature is
only available when using the iPECS integrated Voice Mail; a
button are required.
AME
OPERATION
To assign an AME button:
Silent Text
/ button, and/or
HOLD SAVE
button.
FLEX
button.
DND
TEXT MESSAGE
Message, or ignore the new call. A
TEXT MESSAGE
button,
5
User Guide
button, and cannot be
MUTE
and