Using Answering Machine Emulation (Ame); Differential Ring Signals - iPECS LIP-9000 Series User Manual

While busy, certain stations can activate Voice-Over to your phone. In this
case, audio is received from both the active call and the Voice Over
announcement at the same time.
Respond to any of these Off-hook Signals in one of several ways; place
the existing call on Hold and answer the new incoming call, activate One-
time DND, send a Silent Text Message, or ignore the new call.
The Attendant may use Intrusion to announce a call while you are busy.

3.3 Using Answering Machine Emulation (AME)

When your phone is allowed AME, your calls are connected to your voice
mail directly, and, like a normal Answering Machine, the caller's voice is
played over your speaker as it is recorded in the mailbox. Thus, you can
screen the call before answering. There are two methods of notification and
call screening provided, Ring or Speaker mode.
Ring mode — In the Ring mode, the AME flexible button will flash to notify
you of a call. You may press the flexible button to hear the caller as the
voice message is recorded.
Speaker mode — In the Speaker mode, the caller's voice is broadcast over
the speaker of your iPECS Phone automatically.
To screen a call in Ring mode:
 Press the flashing AME button, the caller's voice is broadcast over the
station speaker and stored in the voice mailbox. In the Speaker mode,
broadcast is automatic.
To stop the voice broadcast and leave the caller in Voice Mail:
 Press the illuminated SPEAKER button.
To talk with the caller and record the conversation in Voice Mail:
 Press the MUTE button.
To answer the call and cancel the voice message recording:
 Press the illuminated AME button, the caller is connected and the Voice
Mail disconnected.

3.4 Differential Ring Signals

When multiple phones in a small area ring, it can be difficult to tell which are
ringing. The iPECS Phone has 16 Ring Tones available for differentiating
one phone's ringing from another. This feature can also be used to
20 LIP-9000 Series User Guide - CM - Issue 1.1