Calling Another Station; Calling Another Station Using The Directory; Answering A Call Ringing Your Station; Answering A Second Call Ringing Your Station - iPECS LIP-9040 Operation Manual

LIP-9040
Telephone Operation Guide

Calling another station

1. Dial the extension of the station you wish to reach or, if programmed, press the flexible button
labeled for the extension.

Calling another station using the directory

1. Press [Directory].
2. Press [3].
3. Use the directional buttons surrounding [OK] to browse the directory listing, or dial the first few
characters of a name.
(a) A chart displaying how to dial letters can be found on page 15.
4. When you have highlighted your selection press [OK], your station will call that extension
automatically.

Answering a call ringing your station

1. Lift the handset to answer normally or press [Speaker] to answer hands-free.

Answering a second call ringing your station

1. Press the blinking [Line] button to automatically place the first call on hold and answer the second.
2. Switch between calls by pressing the blinking [Line] button of the caller you wish to speak to.

Answering a call to another station without call coverage

Call coverage is detailed beginning on page Error: Reference source not found.
1. If programmed, press the flashing flexible button that was pre-programmed with the extension that
is ringing.
2. If no such button is programmed dial [*77] followed by the extension that is ringing.

Switching between handset and hands-free

1. Press [Speaker] and hang up the handset to switch to hands-free.
2. Lift the handset to switch from hands-free to handset, the speakerphone will automatically disable.

Group listening

1. While on the call and already using the handset, press [Speaker]
(a) The call will continue to use the handset as usual but the caller will also be heard over the
For support visit Support.Tel-Dat.com
Page 3
email Telephony@Tel-Dat.com
or call (614) 923-8000