Adding Or Replacing Dimms - Nokia IP350 Appliance Installation Manual

Caution
To protect the IP350 or IP380 appliance and the memory modules
from electrostatic discharge (ESD), make sure you are properly
grounded before you touch these components.
Note
Because power to a IP350 or IP380 appliance is automatically
disconnected when the chassis assembly is opened, you do not need to
manually disconnect the power for this procedure. Any servicing of the
unit, however, should be completed with the chassis assembly fully
removed from the appliance. Power is still active in the chassis body and
care should be taken when working on the power supply or power supply
wiring without disconnecting the power cord.

Adding or Replacing DIMMs

To add or replace DIMMs
1. Use Voyager or Lynx to perform an orderly shutdown of the IP350 or
IP380 appliance.
For information about accessing Voyager, see
Voyager"
IP350 and IP380 Appliance Installation Guide
All manuals and user guides at all-guides.com
on page 36.
Replacing or Upgrading Memory
"Accessing Nokia Network
61