Table of Contents
Advertisement
C H A P T E R
3
C O N F I G U R I N G
V 1 0 0
3.4.9.8.3
The FILTER TABLE menu
The FILTER TABLE combines address ranges and protocols defined in the other two Service Management
menus and applies them to receive ports with IP ToS fields to define the entire filter.
PRIO
Each set of rules has a priority which defines the order the rules are applied - 01 is the highest priority. To
change the priority of an entry, edit the PRIO field with a new number. All the entries are re-numbered to
reflect changes to the priorities.
Filters are applied in the order of priority in the table. Once a filter is matched no other filters in the table
are attempted. The SERVICE MANAGEMENT FILTER TABLE provides a single page of up to 15 entries.
ADDRESSES
The SOURCEADDR and DESTADDR fields can be configured with the value ANY or a name from the
SERVICE MANAGEMENT ADDRESS DEFINITIONS menu. The value ANY indicates any source or destination
address.
TOS
The TOS field may be any 8-bit hex value or the word ANY. This defines what the TOS field in the IP
header should be to match the rule.
V100 Versatile Multiplexer Technical Manual Version 2.2
Page 96 of 231
Advertisement
Table of Contents
