Table of Contents
Advertisement
C H A P T E R
4
F E A T U R E S
The terminals are referred to as "RT" (or Remote Terminal) units. It is essential that on the ROUTING
page, a route to each potential destination RT is entered explicitly, so that the unit knows which address
to transmit when establishing a call. This is done in the "Connect Using..." field on the ROUTING page and
must be of the format "RTnnn" where nnn is a numeric field. It may contain up to 14 digits and will be
transmitted to the local RT when the call is established:
V100 Versatile Multiplexer Technical Manual Version 2.2
Page 168 of 231
Advertisement
Table of Contents
