Table of Contents
Advertisement
C H A P T E R
4
F E A T U R E S
Server address sent to the DHCP client (the other side of the V100 network) must be entered into the
"DNS SERVER" address configured on the GENERAL page of the IP configuration. A secondary server
address can also be entered. Finally, the IP address of the WINS server and its domain name should be
entered. Note that these fields are used by the V100 in its name lookup for ping requests. An example of
the GENERAL page configured for DHCP server operation is shown below:
Example GENERAL page for DHCP mode
In RELAY mode, DHCP requests are relayed to a remote DHCP server through the V100 – requests are
relayed to the addresses configured in the primary and secondary server addresses in the DHCP server
configuration:
DHCP
Server
1.1.2.6
DHCP
V100 - Node 1
V100 - Node 2
Client
Example network configuration for DHCP Relay mode
V100 Versatile Multiplexer Technical Manual Version 2.2
Page 184 of 231
Advertisement
Table of Contents
