3 Configuring V100
3.1
The Node ID
The most important item in the V100 configuration is the Node ID. This is a unique number between 0
and 239 which specifies each chassis in the network and it must be programmed into the unit before
anything else. This is done on the SYSTEM menu – see section 3.4.2 for details.
Once the Node ID has been programmed, the unit should be restarted since this allows it to clear all
previous routing information and assume the new identity without confusion.
3.2
Slot and Port Numbers
The V100 Versatile Multiplexer:
The V100 Compact:
V100 Versatile Multiplexer Technical Manual Version 2.2
Slot 0 – The Chassis
Slot 0 – The Chassis
Page 37 of 231
C H A P T E R
3
C O N F I G U R I N G
Option Slot 1
Option Slot 2
Option Slot 1
V 1 0 0
3
Chapter