Table of Contents
Advertisement
C H A P T E R
3
C O N F I G U R I N G
V 1 0 0
NOTE:
When a remote node is accessed, the connection to the chosen unit requires at least 2400bps of
bandwidth, which must be available throughout the route to that node. If the route already supports a
DBA (Dynamic Bandwidth Allocation) connection, the DBA rate will drop by 2400bps. If not, the
connection to the remote supervisor will itself act as a DBA connection and use as much spare bandwidth
as is available. This process is automatic and ensures that the responses of the remote unit are as rapid
as possible.
V100 Versatile Multiplexer Technical Manual Version 2.2
Page 119 of 231
Advertisement
Table of Contents
