Example Configuration - Vocality V100 Technical Manual

4.13.8 Example Configuration

Portions of example configurations have been given in the above sections. This section gives a complete
example IP configuration for a simple 3-node network. Three remote networks are interconnected with
V100s. Node 1 is connected to the 1.1.1.0/255.255.255.0 network. Node 2 is connected to the
1.1.2.0/255.255.255.0 network. Node 3 is connected to the 1.1.3.0/255.255.255.0 network. The V100
network provides connections between Node1 and Node2, and Node1 and Node 3. Virtual ports 0:10 and
0:11 on Node 1 have been configured to communicate with Nodes 2 & 3 respectively. A default network is
not defined at Node1, so traffic from Node 2 and Node 3 networks will only communicate with stations on
the 1.1.1.0, 1.1.2.0 and 1.1.3.0 networks, and nothing beyond. The dynamic bandwidth allocation and
MTU for all V100 channels is set at 256000. A network diagram of this example configuration network is
given below:
1.1.2.1/
24
1.1.2.0
/24
V100 - Node2
1.1.3.0
/24
V100 - Node 3
1.1.3.1/
24
Example configuration network diagram
The following six screen samples show the IP network and static route configuration for all three nodes to
achieve this topology:
V100 Versatile Multiplexer Technical Manual Version 2.2
0:10
0:10
Page 177 of 231
C H A P T E R 4
1.1.1.1/
0:10
24
V100 - Node1
0:11
F E A T U R E S
1.1.1.0
/24