Table of Contents
Advertisement
3.4.5.3
The DIRECTORY menu
Any of the voice channels in the network may be assigned a dialling code such that
dialling digit sequences map on to physical destination ports. This page lists all ports
in the network and allows the user to enter DTMF destination numbers that the
network will use to set up calls, without having to use the V100 hardware port
numbering scheme. The DIRECTORY page of all voice ports in a network could look
like this:
This facility firstly allows voice ports on units with node numbers greater than 9 to be dialled from a
telephone or PABX when using the V100 "AUTO" destination mode. Secondly it may be used to integrate
ports connected over a V100 network into an existing dialling plan or corporate extension list. The direct
hardware numbering scheme may still be used at the same time i.e both "114" and "823" would dial port
1:1:4 as long as the number 114 has not also been used as a directory code.
V100 Versatile Multiplexer Technical Manual Version 2.2
C H A P T E R
Page 63 of 231
3
C O N F I G U R I N G
V 1 0 0
Advertisement
Table of Contents
