The Voice Activation Menu - Vocality V100 Technical Manual

C H A P T E R 3 C O N F I G U R I N G V 1 0 0
3.4.5.4

The VOICE ACTIVATION menu

The VOICE ACTIVATION menu should be used only when it is necessary to guarantee that no data, IP or
Voice traffic is sent over a link. For example, when using Inmarsat to prevent the unit automatically
connecting and incurring call charges.
In all other configuration locations no destination mappings should be configured – that is, they should be
left blank.
The activation script is run when the first voice call goes off-hook. A single TTY command (please refer to
the TTY Manual for more information) is entered on each line which assigns a destination to the voice,
data or IP channel.
The deactivation script is run when the last voice call goes on-hook. A single TTY command is entered on
each line which removes the destinations added in the activation script. Both the activation script and the
deactivation script are limited to eight TTY commands.
V100 Versatile Multiplexer Technical Manual Version 2.2
Page 64 of 231